How to draw a single-leaved door with fanlight and screen abutment with FORSTER fuego light?

- load System FORSTER

- Menu FORSTER -> fuego light EI30/EI60-> Gener. Sections

- draw a centre line grid

- draw the frame for the door (command FRAME).

- draw the frame for the fanlight and screen abutment (command FRAME)

- draw the bottom rail profile in the fanlight with the command T/M-PROFILE. Move the profile with a left click, accept or change the value for moving and fix the position with a right click. Or move the profile with the AutoCAD Command MOVE.

- draw the t/m-profiles between the fanlight and the screen abutment with the command T/M-PROFILE. Move the profile with a left click, accept or change the value for moving and fix the position with a right click.

- insert the door with the command FILLING.

- insert the fanlight and the screen abutment with the command FILLING.

(- change fillings with a double click.)

- generate sections