3D navigation

Toolbox -> SYSCAD 3D functions ->

Ribbon: Programs -> 3D ->

In the SYSFLY 3D Views toolbar you will find auxiliary commands for navigation and BKS determination.

The BKS 3 Points command is used to set the current user coordinate system (BKS).

With the following commands you set your viewpoint related to the world coordinate system (WKS) , , , , and .

The command BKS world restores the BKS to the original world setting.

The command Top view looks at the current BKS from above.

The command Reset Target sets the read-only AUTOCAD variable Target back to the value 0,0,0 in older AUTOCAD versions.

Tip: If you have problems with your drawing due to the change of the viewpoint in CAD, use the command "RESET TARGET " to solve the problem.