|
Toolbar: SYSCAD Draw2 -> SYSFLY Arc ->             
Ribbon: SYSCAD Draw -> Arc ->
Command: "Arc 0.18" Starts the arc command and draws on layer UMRISS018. (Def.: SYSCAD variable -> List -> Layer -> Object layer 1)
Command: "Arc 0.25" Starts the arc command and draws on layer UMRISS025. (Def.: SYSCAD variable -> List -> Layer -> Object layer 2)
Command: "Arc 0.35" Starts the arc command and draws on layer UMRISS035. (Def.: SYSCAD variable -> List -> Layer -> Object layer 3)
Command: "Arc 0.50" Starts the arc command and draws on layer UMRISS05. (Def.: SYSCAD variable -> List -> Layer -> Object layer 4)
Command: "Arc 0.70" Starts the arc command and draws on layer UMRISS07. (Def.: SYSCAD variable -> list -> layer -> object layer 5)
Command: "Arc 1.00" Starts the arc command and draws on layer UMRISS10. (Def.: SYSCAD variable -> List -> Layer -> Object layer 6)
Command: "Arc - -" Starts the arc command and draws on the layer VERDECKT. (Def.: SYSCAD variable -> List -> Layer -> VERDECKT).
Command: "Arc -.-.-" Starts the arc command and draws on the MITTE layer. (Def.: SYSCAD variable -> List -> Layer -> MITTE).
Command: "Arc Aluminium" Starts the arc command with the layer defined in the SYSCAD variable for aluminium (e.g. layer SYS_AL_CONT).
Command: "Arc Steel" Starts the arc command with the layer defined in the SYSCAD variable for steel (e.g. layer SYS_ST_CONT).
Command: "Arc Stainless Steel" Starts the arc command with the layer defined in the SYSCAD variable for stainless steel (e.g. layer SYS_ST_CONT).
Command: "Arc Plastic" Starts the arc command with the layer defined in the SYSCAD variable for plastic (e.g. layer KPROFIL).
Command: "Arc Wood" Starts the arc command with the layer defined in the SYSCAD variable for wood (e.g. layer SYS_WO_CONT).
| 
