Profile adaptation

Toolbar: SYSCAD Generating sections -> SYSFLY-Profile alter ->

Ribbon: SYSCAD Gener. Sections -> Options ->

This option is used to position your profiles almost everywhere in the elevation.

Activate the command and select the profile to be modified. The profile end close to the click point is now attached to the cross-hair and can be positioned.

The reference point (arrow) can be determined by the RETURN key. The rotation point (cross) can be individually determined with entering "D" .

Example: Modify corner connection from perpendicularly to horizontally passing through.

Delete the left profile...

..and call the command PROFILE ADAPTION.

Click on the right profile and select the left FRAME with the OSNAP perpendicular. Finished!!!