Statics

Toolbar: SYSCAD statics programs

Ribbon: SYSCAD programs -> statics

In the SYSCAD static programs toolbar you will find the possible calculation cases for static pre-dimensioning.

This pre-dimensioning does not replace a structural analysis in any case!

The required moments of inertia apply exclusively to profiles made of aluminium with the alloy EN-AW 6060 and the ageing condition T66 (formerly AlMgSi0, 5, F22). A modulus of elasticity of E = 7* 10³ kN/cm² is applied here.

The command calculates the load case Vertical facade mullion 1-field-girder

The command calculates the load case Transom

The command command calculates the Glas load.

The command calculates the Linear expansion