Part and insert with rest as edge distance

Toolbox: SYSCAD-Draw / SYSFLY Intersect

Command to divide a line with blocks in the specified distance. The calculated rest is used as the edge distance.

Command:

Choose objects or Return for Point:               Choose the line

Total length  = <1500.0>

Distance <100> :                        250 (type in the distance)

Select block or Return for Block name                choose your block

Blockname  <BEA_V2_000690_M12xm(mittel)x100_0x1>:

Distance  <0> <125.0>

Distance  <1> <250.0>

Distance  <2> <250.0>

Distance  <3> <250.0>

Distance  <4> <250.0>

Distance  <5> <250.0>

Distance  <6> <125.0>

Command: