Turbo view

Toolbar: SYSCAD Generating sections ->

Ribbon: SYSCAD Gener. Sections -> View ->

Use this program to generate elevations in a few seconds.

o

First enter the values for the centre line grid. The partition is defined from the left to the right and from the bottom to the top. The comma is used as field delimiter.

The whole element can be filled with a fixed light. The properties are to be defined later. Use the command ALTER FILLING  from the command group GENERATING SECTIONS / OPTIONS to change the fillings or just double-click the filling.

The elevation is shown completely dimensioned. Please not, that you can define dimensioning options in the SYSCAD Variable at DENOMINATION / DIMENSIONING. The SYSCAD template (SYSCAD.DWT) contains predefined dimensioning types. These types can be used as template for your alteration.

Choose the glazing properties of the fixed light from the following dialog box. The result should be the following:

You may process this elevation with the following commands, change fillings etc.

Create a simple view with a window series: