SYSCAD - CAD for metal construction Start  back  next

Dimension profile axis

 Generating sections > Options > Dimensioning profile axis

Toolbox: SYSCAD GENERATING SECTIONS opt_16

Toolbar: SYSCAD Generating sections -> opt_16 or SYSCAD-Dimension -> SYSFLY-Sight-dimensioning SYSFLY-Ansichtsbemassung

Ribbon: SYSCAD Gener. Sections -> Options -> opt_16

The program determines horizontally or vertically the centre line dimension and outer dimensions of the elevation. The outer intersections of the distance " Centre line dimensioning from point : " " to point " determine the outer dimension. The centre of the mullion and transom profiles in between determine the centre line dimension.

Measure filling lights Dimension filling opening

Axle dimensioning facade Axis dimensioning

Axis dimension window Axis dimensioning window

 dimension elevation width Dimension sightline

Dimension interior elevation widths Dimension sightline inside

Dimension complete Complete dimensioning

 Dimension sash Dimension leaves

Glass dimension Dimension glass

 Dimension inner chamber Dimension inner chamber

 

Command:

Centre line dimensioning from point:(P1)

to point: (P2)

Origin of extension line : (P3)

Dimension line location : (P4)

kap5_30

The dimension style for the elevation can be defined in the SYSCAD VARIABLE at DENOMINATION:

kap5_49

In case you draw your elevation on scale of 1:1 and display it 1:10 in general, it is advisable to assign the style ANSICHT1_10, defined in the prototype drawing SYSCAD.DWT, to the variable DIMENSION STYLE ELEVATION. All dimensions in the elevation are drawn at the pre-defined layer and in style ANSICHT1_10.