SYSCAD - CAD for metal construction Start  back  next

Doors

 Generating sections > Filling > Filling > Doors

kap5_19

Select the kind of door, the opening type, the glass thickness and all other parameter from the dialog box.

The following message appears subsequently:

RETURN for end of filling

First corner (bottom left)

or select point in closed contour

T-bars can be generated afterwards using the function T-bar.

Door hinges can be selected from the following dialog box, if defined in the system.

kap5_60

Select the door hinge system first.

Second select the color and afterwards the model of door hinge (2-part or 3-part variants). The meaning of the selected variant is displayed in the 'Info' field.

 

The arrangement of the door hinges is according to the distances shown down left in the dialog box. In the example 3 door hinges are specified. To arrange the door hinges the first values of the fields 'top', 'centre', and 'bottom' are considered. The second value of the field 'top' is only considered for the fourth door hinge. In case the door hinges should only be fixed top and bottom, the value for 'centre' can be deleted.

 

 

The fittings on the right hand side can be defined in the screen Special fittings.