SYSCAD - CAD for metal construction Start  back  next

Cut List Order

 Cut List > Cut List Order

Toolbox: SYSCAD GENERATING SECTIONS zsl_24

The program CUT LIST ORDER is used to generate the following lists from SYSCAD® drawings:

 

•cut lists

 

•glass lists

 

•gaskets lists

 

•saw lists

 

•waste optimization

The lists can be generated in Microsoft Excel Version 8.0, 9.0 or 10 (e.g. from Office 97, 2000 and XP).

 

•Orders with up to 200 positions can be generated.
•The positions must be drawn with the application SYSCAD® (from version 12.11 or 13.01)
•The individual positions can be located at different drawings.

Restriction:

The calculation of the pressure plate / face cap profiles depends on the mullion / transom profiles.

Command: ZSL starts the cut list program.

d_zsl1

You will find all commands and possibilities of the program CUT LIST ORDER in this dialog box.